Skip to content
Angle Tools

Saved measurements

Measurements you save appear here and follow you between tools.

Printable protractor

Print a protractor at true size

Shape
Paper
Units

From ⁦60 mm⁩ to ⁦183 mm⁩ on this paper.

Marks
Scales

Draws a line at this angle, handy as a template for cutting or marking out.

Printed size: ⁦156 × 102 mm⁩

Printing at true size

  1. In the print dialog, choose 100% or Actual size, and turn off Fit to page.
  2. Measure the check bar with a ruler. If it isn't exactly ⁦50 mm⁩, the scale is off: check the print settings and print again.
  3. Cut along the outer edge. To measure, put the centre mark on the corner and the baseline along one side.

Printable protractor

Set up a half or full-circle protractor, size it for A4 or Letter paper, add a marked angle to use as a cutting template, and print it at exactly the right scale, with a check bar to confirm.

Frequently asked questions

Guides

About these measurements

Readings are estimates taken from rendered pixels and consumer device sensors. Do not rely on them for structural engineering, surveying, manufacturing inspection, navigation, or medical decisions. Check anything safety-critical with a calibrated instrument.

All processing happens in your browser. No image, camera frame or sensor reading is ever uploaded.

Other ways to measure